Search by property

Jump to: navigation, search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "terms-internal:enDefinition" with value "temperature of the surface at the time of sampling". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


    

List of results

  • mixs:alt  + (the altitude of the sample is the vertical distance between Earth's surface above sea level and the sampled position in the air)
  • mixs:altitude  + (the altitude of the sample is the vertical distance between Earth's surface above sea level and the sampled position in the air)
  • mixs:solar irradiance  + (the amount of solar energy that arrives at a specific area of a surface during a specific time interval)
  • mixs:host color  + (the color of host)
  • mixs:slope aspect  + (the direction a slope faces. While looking
    the direction a slope faces. While looking down a slope use a compass to record the direction you are facing (direction or degrees); e.g., NW or 315 degrees. This measure provides an indication of sun and wind exposure that will influence soil temperature and evapotranspiration.
    e soil temperature and evapotranspiration.)
  • mixs:elev  + (the elevation of the sampling site as measured by the vertical distance from mean sea level)
  • mixs:host substrate  + (the growth substrate of the host)
  • mixs:host height  + (the height of subject)
  • mixs:host length  + (the length of subject)
  • mixs:wastewater type  + (the origin of wastewater such as human waste, rainfall, storm drains, etc.)
  • mixs:microbial biomass  + (the part of the organic matter in the soil that constitutes living microorganisms smaller than 5-10 micrometer. If you keep this, you would need to have correction factors used for conversion to the final units)
  • mixs:build occup type  + (the primary function for which a building or discrete part of a building is intended to be used)
  • mixs:secondary treatment  + (the process for substantially degrading the biological content of the sewage)
  • mixs:pre treatment  + (the process of pre-treatment removes materials that can be easily collected from the raw wastewater)
  • mixs:tertiary treatment  + (the process providing a final treatment stage to raise the effluent quality before it is discharged to the receiving environment)
  • mixs:primary treatment  + (the process to produce both a generally homogeneous liquid capable of being treated biologically and a sludge that can be separately treated or processed)
  • mixs:texture  + (the relative proportion of different grain sizes of mineral particles in a soil, as described using a standard system; express as % sand (50 um to 2 mm), silt (2 um to 50 um), and clay (<2 um) with textural name (e.g., silty clay loam) optional.)
  • mixs:substructure type  + (the substructure or under building is that largely hidden section of the building which is built off the foundations to the ground floor level)
  • mixs:dew point  + (the temperature to which a given parcel of humid air must be cooled, at constant barometric pressure, for water vapor to condense into water.)
  • eb:food  + (the things that people and animals eat)
  • mixs:sludge retent time  + (the time activated sludge remains in reactor)
  • mixs:tot phosphate  + (total amount or concentration of phosphate)
  • mixs:tot carb  + (total carbon content)
  • mixs:organism count  + (total count of any organism per gram or volume of sample, should include name of organism followed by count; can include multiple organism counts)
  • mixs:tot diss nitro  + (total dissolved nitrogen concentration, reported as nitrogen, measured by: total dissolved nitrogen = NH4 + NO3NO2 + dissolved organic nitrogen)