Browse wiki

Jump to: navigation, search
dwc:minimumDistanceAboveSurfaceInMeters
Has query
"Has query" is a predefined property that represents meta information (in form of a subobject) about individual queries.
dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters + , dwc:minimumDistanceAboveSurfaceInMeters +
Imported from
"Imported from" is a predefined property that describes a relation to an imported vocabulary.
dwc:minimumDistanceAboveSurfaceInMeters  +
Classes Property , Concept , Darwin Core
Modification date
This property is a special property in this wiki.
11 December 2012 16:39:03  +
Page has default form
This property is a special property in this wiki.
Concept  +
concept type http://www.w3.org/1999/02/22-rdf-syntax-ns#Property  +
dc:language en  + , es  + , zh-Hans  + , ja  +
dcterms:identifier http://rs.tdwg.org/dwc/terms/minimumDistanceAboveSurfaceInMeters  +
dcterms:issued 2008-11-19  +
dcterms:modified 24 April 2009  +
rdfs:isDefinedBy http://rs.tdwg.org/dwc/terms/  +
sioc:has discussion http://terms.tdwg.org/wiki/Talk:dwc:minimumDistanceAboveSurfaceInMeters  +
skos:closeMatch http://terms.tdwg.org/wiki/abcd:DataSets/DataSet/Units/Unit/Gathering/Height/MeasurementOrFactAtomised/LowerValue  +
skos:definition en:The lesser distance in a range of dista
en:The lesser distance in a range of distance from a reference surface in the vertical direction, in meters. Use positive values for locations above the surface, negative values for locations below. If depth measures are given, the reference surface is the location given by the depth, otherwise the reference surface is the location given by the elevation.
ce is the location given by the elevation.  +
, es:La menor distancia en un rango de dista
es:La menor distancia en un rango de distancia desde una superficie de referencia en dirección vertical, en metros. Utilice valores positivos para las ubicaciones por encima de la superficie, valores negativos para ubicaciones por debajo. Si las medidas de profundidad son provistas, la superficie de referencia es la ubicación determinada por la profundidad, de lo contrario la superficie de referencia es la ubicación dada por la elevación.
cia es la ubicación dada por la elevación.  +
, zh-Hans:在垂直方向,距离参考表面较小的距离范围内的距离,以“米”为单位。使用正值代表表面以上的位置,负值代表表面以下的位置。如果已经给出深度的测量值,那么参考表面的位置由深度确定,否则参考表面的位置由海拔确定。  + , ja:基準となる地表下の垂直方向での距離の最小値(m)。地表より上の場合は正の値を用い、地表下の場合は負の値を用いる。基準となる地表は深さで与えられる、そうでなければ標高で与えられる。  +
skos:example en:1.5 meter sediment core from the bottom
en:1.5 meter sediment core from the bottom of a lake (at depth 20m) at 300m elevation; VerbatimElevation: "300m" MinimumElevationInMeters: "300", MaximumElevationInMeters: "300", VerbatimDepth: "20m", MinimumDepthInMeters: "20", MaximumDepthInMeters: "20", minimumDistanceAboveSurfaceInMeters: "0", maximumDistanceAboveSurfaceInMeters: "-1.5"
aximumDistanceAboveSurfaceInMeters: "-1.5"  +
, es:1,5 metros de sedimento desde el fondo
es:1,5 metros de sedimento desde el fondo de un lago (a una profundidad de 20 metros) a una elevación de 300m; Elevación Original: "300m" Mínima Elevación en Metros: "300", Máxima Elevación en Metros: "300", Profundidad Original: "20m", Mínima Profundidad en Metros: "20", Máxima Profundidad en Metros: "20", Mínima Distancia de la Superficie en Metros: "0", Máxima Distancia de la Superficie en Metros: "-1,5"
stancia de la Superficie en Metros: "-1,5"  +
skos:inScheme Darwin Core +
skos:note en:For discussion see http://code.google.com/p/darwincore/wiki/Location  +
skos:prefLabel es:Distancia Mínima de la Superficie en metros  + , zh-Hans:参考表面以上的最小距离(米)  + , ja:Minimum Distance Above Surface In Meters  + , en:Minimum Distance Above Surface In Meters  +
terms-internal:dcterms-issued 19 November 2008  +
terms-internal:dcterms-modified 24 April 2009  +
terms-internal:enDefinition The lesser distance in a range of distance
The lesser distance in a range of distance from a reference surface in the vertical direction, in meters. Use positive values for locations above the surface, negative values for locations below. If depth measures are given, the reference surface is the location given by the depth, otherwise the reference surface is the location given by the elevation.
ce is the location given by the elevation.  +
terms-internal:enExample 1.5 meter sediment core from the bottom of
1.5 meter sediment core from the bottom of a lake (at depth 20m) at 300m elevation; VerbatimElevation: "300m" MinimumElevationInMeters: "300", MaximumElevationInMeters: "300", VerbatimDepth: "20m", MinimumDepthInMeters: "20", MaximumDepthInMeters: "20", minimumDistanceAboveSurfaceInMeters: "0", maximumDistanceAboveSurfaceInMeters: "-1.5"
aximumDistanceAboveSurfaceInMeters: "-1.5"  +
terms-internal:enLabel Minimum Distance Above Surface In Meters  +
terms-internal:enNote For discussion see http://code.google.com/p/darwincore/wiki/Location  +
terms-internal:isDefinedBy http://rs.tdwg.org/dwc/terms/  +
terms-internal:lowercasePagename dwc:minimumdistanceabovesurfaceinmeters  +
terms-internal:pagename dwc:minimumDistanceAboveSurfaceInMeters  +
vann:termGroup Darwin Core Location +
vann:usageNote http://terms.tdwg.org/w/index.php?title=dwc:minimumDistanceAboveSurfaceInMeters&oldid=9483  +
vs:term status recommended  +
hide properties that link here 
  No properties link to this page.
 

 

Enter the name of the page to start browsing from.