Browse wiki

Jump to: navigation, search
dwc:maximumDistanceAboveSurfaceInMeters
Has query
"Has query" is a predefined property that represents meta information (in form of a subobject) about individual queries.
dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters + , dwc:maximumDistanceAboveSurfaceInMeters +
Imported from
"Imported from" is a predefined property that describes a relation to an imported vocabulary.
dwc:maximumDistanceAboveSurfaceInMeters  +
Classes Property , Concept , Darwin Core
Modification date
This property is a special property in this wiki.
11 December 2012 16:39:00  +
Page has default form
This property is a special property in this wiki.
Concept  +
concept type http://www.w3.org/1999/02/22-rdf-syntax-ns#Property  +
dc:language en  + , es  + , zh-Hans  + , ja  +
dcterms:identifier http://rs.tdwg.org/dwc/terms/maximumDistanceAboveSurfaceInMeters  +
dcterms:issued 2008-11-19  +
dcterms:modified 24 April 2009  +
rdfs:isDefinedBy http://rs.tdwg.org/dwc/terms/  +
sioc:has discussion http://terms.tdwg.org/wiki/Talk:dwc:maximumDistanceAboveSurfaceInMeters  +
skos:closeMatch http://terms.tdwg.org/wiki/abcd:DataSets/DataSet/Units/Unit/Gathering/Height/MeasurementOrFactAtomised/UpperValue  +
skos:definition en:The greater distance in a range of dist
en:The greater distance in a range of distance from a reference surface in the vertical direction, in meters. Use positive values for locations above the surface, negative values for locations below. If depth measures are given, the reference surface is the location given by the depth, otherwise the reference surface is the location given by the elevation.
ce is the location given by the elevation.  +
, es:La mayor distancia en un rango de dista
es:La mayor distancia en un rango de distancia desde una superficie de referencia en dirección vertical, en metros. Utilice valores positivos para las ubicaciones por encima de la superficie, valores negativos para las ubicaciones por debajo. Si las medidas de profundidad son provistas, la superficie de referencia es la ubicación determinada por la profundidad, de lo contrario la superficie de referencia es la ubicación determinada por la elevación.
la ubicación determinada por la elevación.  +
, zh-Hans:在垂直方向,距离参考表面更大的一个距离范围内,以米作为单位。使用正值代表表面以上的位置,负值代表表面以下的位置。如果已经给出深度的测量值,那么参考表面的位置由深度确定,否则参考表面的位置由海拔确定。  + , ja:基準となる地表下の垂直方向での距離の最大値(m)。地表より上の場合は正の値を用い、地表下の場合は負の値を用いる。基準となる地表は深さで与えられる、そうでなければ標高で与えられる。  +
skos:example en:1.5 meter sediment core from the bottom
en:1.5 meter sediment core from the bottom of a lake (at depth 20m) at 300m elevation; VerbatimElevation: "300m" MinimumElevationInMeters: "300", MaximumElevationInMeters: "300", VerbatimDepth: "20m", MinimumDepthInMeters: "20", MaximumDepthInMeters: "20", minimumDistanceAboveSurfaceInMeters: "0", maximumDistanceAboveSurfaceInMeters: "-1.5"
aximumDistanceAboveSurfaceInMeters: "-1.5"  +
, es:1,5 metros de sedimento desde el fondo
es:1,5 metros de sedimento desde el fondo de un lago (a una profundidad de 20 metros) a una elevación de 300m; Elevación Original: "300m" Mínima Elevación en Metros: "300", Máxima Elevación en Metros: "300", Profundidad Original: "20m", Mínima Profundidad en Metros: "20", Máxima Profundidad en Metros: "20", Mínima Distancia de la Superficie en Metros: "0", Máxima Distancia de la Superficie en Metros: "-1,5"
stancia de la Superficie en Metros: "-1,5"  +
skos:inScheme Darwin Core +
skos:note en:For discussion see http://code.google.com/p/darwincore/wiki/Location  +
skos:prefLabel es:Distancia Máxima de la Superficie metros  + , zh-Hans:参考表面以上的最大距离(米)  + , ja:Maximum Distance Above Surface In Meters  + , en:Maximum Distance Above Surface In Meters  +
terms-internal:dcterms-issued 19 November 2008  +
terms-internal:dcterms-modified 24 April 2009  +
terms-internal:enDefinition The greater distance in a range of distanc
The greater distance in a range of distance from a reference surface in the vertical direction, in meters. Use positive values for locations above the surface, negative values for locations below. If depth measures are given, the reference surface is the location given by the depth, otherwise the reference surface is the location given by the elevation.
ce is the location given by the elevation.  +
terms-internal:enExample 1.5 meter sediment core from the bottom of
1.5 meter sediment core from the bottom of a lake (at depth 20m) at 300m elevation; VerbatimElevation: "300m" MinimumElevationInMeters: "300", MaximumElevationInMeters: "300", VerbatimDepth: "20m", MinimumDepthInMeters: "20", MaximumDepthInMeters: "20", minimumDistanceAboveSurfaceInMeters: "0", maximumDistanceAboveSurfaceInMeters: "-1.5"
aximumDistanceAboveSurfaceInMeters: "-1.5"  +
terms-internal:enLabel Maximum Distance Above Surface In Meters  +
terms-internal:enNote For discussion see http://code.google.com/p/darwincore/wiki/Location  +
terms-internal:isDefinedBy http://rs.tdwg.org/dwc/terms/  +
terms-internal:lowercasePagename dwc:maximumdistanceabovesurfaceinmeters  +
terms-internal:pagename dwc:maximumDistanceAboveSurfaceInMeters  +
vann:termGroup Darwin Core Location +
vann:usageNote http://terms.tdwg.org/w/index.php?title=dwc:maximumDistanceAboveSurfaceInMeters&oldid=9473  +
vs:term status recommended  +
hide properties that link here 
  No properties link to this page.
 

 

Enter the name of the page to start browsing from.